Pathway #48xx Installation Repeaters Operation and Mainten Manual de usuario descargar pdf

MAINTENANCE

OPERATING ENVIRONMENT

This guide covers the following Pathway product

numbers:

#4807 - 4-way Installation Repeater

#4808 - 8-way Installation Repeater

#4809 - 12-way Installation Repeater

#4810 - 16-way Installation Repeater

#4813 - 4-way Installation Repeater w/RDM

#4814 - 8-way Installation Repeater w/RDM

#4815 - 12-way Installation Repeater w/RDM

Pathway eDIN Installation Repeaters are in-

tended for installation in dry, indoor, non-

hazardous environments suitable for NEMA 1

enclosures.

Operating temperature range is from –10°C to

+60°C, up to 95% humidity, non-condensing.

OPERATION

Installation Repeater—Operation and Maintenance

Model 4808

Pathway eDIN Installation Repeaters require

very little maintenance. Enclosures exteriors

should be inspected annually for physical dam-

age from impacts or liquids. Steps should be

taken, if necessary, to prevent liquids from con-

tacting the enclosure in future.

Enclosure interiors should be inspected

annually for loose wires and connections, and

for debris. Connections should only be tight-

ened if necessary. Debris should be gently re-

moved from the interior and its source deter-

mined.

WARNING

All DMX input/output ports must be connected

to low-voltage data lines only. Do not connect

high voltage sources to these connectors or

serious damage and possible injury will occur.

Once a Pathway eDIN Installation Repeater is

completely and properly installed, its operation

is fully transparent to the end user. No on-going

or periodic user action is required.

In the event of power loss, an eDIN Installation

Repeater will resume full normal operations

once power is restored, without any user action

or intervention necessary.

Pathway Connectivity Solutions

#103 - 1439 17 Avenue SE Calgary AB Canada T2G 1J9

(403) 243-8110 fax (403) 287-1281

support@pathwayconnect.com

www.pathwayconnect.com

All Pathway eDIN Installation Repeaters shall

carry a two-year Limited Warranty against de-

fects in materials and workmanship under nor-

mal use and service. Pathway Connectivity’s

sole responsibility under this warranty shall be

to repair, replace or refund at Pathway’s discre-

tion, any units which are determined to be de-

fective upon Pathway’s inspection. Pathway

may elect to refund the cost of the device upon

return, solely at Pathway Connectivity’s discre-

tion. This warranty applies to the original pur-

chaser or retail customer only

WARRANTY

WARNING 1

Indice de contenidos

Pagina 1 - WARNING

MAINTENANCE OPERATING ENVIRONMENT This guide covers the following Pathway product numbers: #4807 - 4-way Installation Repeater #4808 - 8-way Installa

Comentarios a estos manuales

Sin comentarios

Pathway #48xx Installation Repeaters Operation and Mainten Manual de usuario

Busca en linea o descarga Manual de usuario para Hardware De La Computadora Pathway #48xx Installation Repeaters Operation and Mainten. Pathway #48xx Installation Repeaters Operation and Maintenance Guide User Manual Manual de usuario

Indice de contenidos

Comentarios a estos manuales

Relacionado con productos y manuales para Hardware De La Computadora Pathway #48xx Installation Repeaters Operation and Mainten